No Name

General Craft Discussion => Full range of crafts covered here => Card Making => Topic started by: Jen636 on June 13, 2006, 12:40:26 PM

Title: Quickutz dies
Post by: Jen636 on June 13, 2006, 12:40:26 PM

Hi

Can anyone help me I've just bought a quickutz die to use with my sizzix machine I've bought the converter too.

The die hasn't come with any instructions I've got a die a piece of sticky paper and a piece of foam.

Does anyone know how I set my die up?

Thank for your help in adance.

Jenny

Title: Re: Quickutz dies
Post by: suet on June 14, 2006, 08:18:09 PM

hi jen636
stick your piece of foam onto the same side as the raised image this will prevent your paper or card getting stuck in your die and the plastic square can be used on other side if you find that it does not cut very well hope this will help you.......also did you buy the quickutz converter as well as the sizzix one as you need both of them to work....if not place a piece of cardboard (about the same size as the white cutting mat) underneath the white mat .....I hope you understand this I am not very good at explainig things...good luck

Title: Re: Quickutz dies
Post by: Jen636 on July 11, 2006, 03:28:26 PM

Hi

Thanks for your help.  Sorry don't get on line much due to a bad back.

Got the die working okay now.

Regards

Jenny